Select KiNOS DFU (Interface 0) from the dropdown list, select libusbK driver and click Install/Replace Driver. Now, in Device Manager, the KiNOS Boot DFU should show up like this: The process should only take a second and result in a success message. Select KiNOS Boot DFU from the dropdown list, select libusbK driver and click Install/Replace Driver.
Step 4įollow the next instructions as appropriate depending on Dongle’s current operation mode. If you hover your mouse cursor over the Vendor ID, you should get the full name of the Vendor displayed (here Kirale Technologies). The Vendor ID (VID, here 0x2DEF), Product ID (PID, here 0x0102 or 0x0000) and optionally Interface ID (MI) are also displayed under USD ID for your reference. To see USB devices that already have a driver installed, go to the Options menu and select List All Devices. If you cannot see the device listed, then it probably means that it already has a driver installed. With the application running you should see KiNOS interfaces appear in the dropdown list depending on Dongle’s current operation mode (click on the dropdown to see all devices).
In case it triggers a UAC (User Account Control) prompt, you should answer Yes.
Launch Zadig (it doesn’t need installation). This application is meant to install a libusb compatible driver for a device that does not have such a driver installed yet. In this case Device Manager will display two devices, KiNOS DFU and KiNOS Virtual COM and will also put them in the Other devices branch.ĭownload Zadig free tool from its official website. Device Manager will display the device as KiNOS Boot DFU and will put it in the Other devices branch.īy the contrary, if the LED is blinking slowly that means that a valid firmware has been loaded and KiNOS is running normally. This indicates that it is in DFU mode and is waiting for firmware update. If a valid firmware image has not been loaded yet, the Dongle’s LED will begin blinking fast. Plug a Dongle into a free USB port of your computer. Luckily, there is a free tool that will do the job. Windows systems require (the very first time) to manually install USB drivers for KTDG102 Dongle.
0 kommentar(er)
